Question About Dual IDE Channel Settings
Frequently Asked Questions: Can I connect a older ATA33 drive with my newer ATA66/100/133 drive? Should be an easy move. thansk again for all your help! In Windows NT version 3.1 this path is only valid for IDE and ESDI drives; in Windows NT version 3.5, 3.51 and 4.0 it is valid for SCSI drives as well. Source
Early in the Install process there is an option to install device drivers that windows does not have, and make them a completely "internal" feature of this particular installation so the Keep the drive in the protective anti-static container until ready to install. Drives come defaulted to be ready to be installed in a single drive environment. BUY NOW FREE TRIAL Partition Master Server Professional server partition software for Windows Server system.
Ide Hard Drive Jumper Settings
IF you go this route, the correct setting for the SATA Port Mode is AHCI (or maybe "Native SATA").(b) Alternatively for Win XP, here's the "handy trick" I mentioned. The hard disk is similar, but this time I chose “Master with Slave Present“. Since most of people are using Windows 2000 or XP, so overleap all the steps in fdisk. One was to be sure that builders knew exactly how to use the AHCI driver install process when installing XP, and they all cover it in their manuals.
- and my standard ATA100 drive is a secondary.
- Tell us more about what happens when your PC boots up...
- The followed screen looks like this.
- of course you have to do the install from a floppy disk.
- Note: If you want to recover data from the "OLD" drive, don't do this!
- Flag Permalink This was helpful (0) Collapse - 1.
- Flag Permalink This was helpful (0) Collapse - It's fine by ackmondual / July 22, 2005 11:48 AM PDT In reply to: Mixing SATA and IDE drives in a system?
System Specs; ASUS a8n32-sli deluxe mobo AMI v.02.58 Bios 1303 WD500gb SATA HDD (Black Caviar) WD200gb IDE HDD nVIDIA SATA and SATA RAID Drivers are installed as well as up to solved HP all-in-one BIOS/secure boot issue Can't find your answer ? my cd and dvd roms are under 2nd channel and now i've installed a ide hdd under the first channel and have it set as slave with jumper(don't think this matters Ide Cable Select Stay logged in Search titles only Posted by Member: Separate names with a comma.
i only have one SATA drive and one IDE. Most BIOS's have a Port Mode setting called something like "IDE (or PATA) Emulation". So basically he has 2 boot.ini one on each hard drive, when he boots into Pro that hard drive is set as master, when he boots into Home that hard drive EaseUS Partition Master, comprehensive hard disk partition tool and system optimization software for Windows-based administration, enables you to easily partition the hard disk or change/extend partition without data loss under Windows.
TechSpot Account Sign up for free, it takes 30 seconds. Ide Cable Definition Main Sections Technology News Reviews Features Product Finder Downloads Drivers Community TechSpot Forums Today's Posts Ask a Question News & Comments Useful Resources Best of the Best Must Reads Trending Now it freezes at the windows loading screen.>i formatted and partitoned the SATA drive wiv the disk writer program from Seagate, and now the SATA switches between being one partition or the i thought it would be helpful to those wiv the same problemshope this helpsbabs Flag Permalink This was helpful (0) Collapse - SATA & IDE Combination Troubles--but w/ SATA adapters IDE's
How To Connect Ide Hard Drive To Motherboard
If they aren't then you've got some troubleshooting to do. Still looking for ways to recover the original boot sequence installed through BIOS settings while installing XP on the primary drive. Ide Hard Drive Jumper Settings Save and exit the system setup program. How To Connect Ide Hard Drive To Sata Motherboard It sees any other IDE drive attached, but not the HDD.
how can i tell if it is and if it isn't how can i set that up?. http://robotadv.com/hard-drive/question-about-2-hard-drives-with-vista-64-bit.html It really didn't matter much until the hard drive makers started making drives with the Cable Select option. mrs315Feb 15, 2011, 11:55 PM finally, i chose yours as the best answer paperdoc because you referred to the computer as stupid rather than me! Newer Than: Search this thread only Search this forum only Display results as threads More... How Many Hard Drives Can Be Connected To A Single Ide Cable
by nelchael_com / November 22, 2006 5:48 AM PST In reply to: Same problem here... __[ In English, resume/summary ]______________________I get a HD SATA and want turn it the Primary Boot An unused drive power cable for your new drive. one as master and other as slave.... have a peek here The digrams indicate which pins a jumper should connect.
This means that the operating system will be using interrupt (INT) 13 BIOS calls to find and load NTOSKRNL.EXE and any other files needed to boot Windows NT. Ide Cable To Sata You also can partition hard disk with it. Setting Master or Slave on an IDE device has nothing to do with what you boot from.
However, one of the gaps between the end connectors and the middle connector is longer – this is the end that plugs into your motherboard.
by RJSheppard / July 23, 2005 1:30 AM PDT In reply to: Mixing SATA and IDE drives in a system? You actually have to enter a RAID configuration utility and deliberately assign HDD units to a RAID array and then Create it if that's what you want. Troubleshooting No hard drives show up: Do you have two drives on the cable? What Is The Voltage Of The Red And Yellow Wires On Most Power Supplies? i now realise this might have been premature and i'm not sure where to enable AHCI?
Wonder what connects to where on the cable? All those drives work just fine, and the boot sequence I have set is 3½" floppy first (yes, I have one), upper optical drive second, and SATA0 port unit last - I did exactly as posted above, now when I boot, low and behold I get a boot menu consisting of: Windows XP Pro Windows XP Home Windows Default Which is great! Check This Out All Rights Reserved.
I have OS's on both drives and can boot from either by selecting which one I want to be the primary at startup(note this will have an effect on drive letters). But it only recognizes a floppy as the source for the SATA controller. So, to make it a slave device, I place a jumper over the central (second) pair. I have two 320 GB Seagate SATA II HDD's on SATA ports, and 2 DVD-RW dual layer optical drives (one with Lightscribe) each as Masters on two separate IDE ports.
I just switched the cables, put my dvd and cd writer drives on the primary IDE cable instead, restarted, and voila!My drive lettering is messed up nowA:floppy C:SATA HD ------ ok The way technicians have always done it in the past with the 40-wire cable was Master in the Middle connection and Slave on the end. if you are wanting to make your scsi disk be the first (boot) device this is done in the bios. The hard drive doesn't even power up: Check to make sure the IDE cable is connected correctly.
But if you do press that key, you enter a subroutine to allow you to install the driver(s) needed. in this case the drive showed up in bios under third ide channel. Partition the drive. The blue connector should be installed into the Primary IDE connector.
On each channel, there is a master and a slave device. Unless of course anyone can suggest a way of editting boot.ini. I have a similar problem with dual booting from separate drives, except both drives have the same OS installed on them (XP). The three connectors are typically different colors and attach to specific items: The blue connector attaches to the motherboard.
However, you then change it to be second with the SATA unit first. More recently I connected an older 120 GB IDE HDD as a Slave on one of those ports. You will note that there are NO SLAVES on those later IDE ports after the first two.